Burkert Type 1150 - Manual (Page 9)

1150 - 7
G
ENERAL
N
OTES
Scope of delivery
Immediately after receipt of a shipment, make sure that the contents are undamaged and match the
scope of delivery stated on the packing slip.
If there are discrepancies, please contact immediately our customer service:
Bürkert Fluid Control Systems
Service Department
Chr.-Bürkert-Str. 13-17
D-76453 Ingelfingen
Tel.: 07940 10-111, Fax: 07940 10-448, Email [email protected]
or maybe local Bürkert Rep. See back page for contact information in other countries.
This device contains electronic components that are sensitive to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects will damage these components. In the worst case, they
will be immediately destroyed or will fail after commissioning.
Observe the requirements of EN 100 015 - 1 in order to minimize the possibility of, or avoid, damage from
instantaneous electrostatic discharge. Also take care not to touch components that are under supply
voltage.
Protection from damage by electrostatic charging
ATTENTION!
The warranty covers only faultless condition of the Process and Program controller. No
liability will be accepted for consequential damage of any kind that may arise from
failure or malfunctioning of the device.
Warranty conditions
This document contains no warranty statements. Please refer to our general sales and business
conditions. A prerequisite for validity of the warranty is use of the device als intended with observance of
the specified conditions of use.