Burkert Type 8076 - Manual (Page 22)

20
Technicaldata
Specifications of the power source (not
supplied) of the UL devices • limited energy source (in accordance to UL 61010-1,
paragraph 9.3)
• or Class 2 source (in accordance to standards 1310/1585 and
60950-1)
Current consumption
• version with 2 or 3 outputs (2 wires)
• version with 4 outputs (3 wires)
• 25 mA max. (at 14 V DC)
• 5 mA max. (at 12 V DC)
Current consumption, with loads on the
transistors 1 A max.
Power consumption 40 W max.
Protection against polarity reversal yes
Protection against voltage spikes yes
Protection against short circuits yes, transistor outputs
Transistor output
• Version with only 1 transistor output
• Version with 2 transistor outputs
• NPN, open collector, 700 mA max., 1-36 V DC
• NPN (/sink) or PNP (/source) (depending on parameter setting),
open collector, 700 mA max., 500 mA max. per transistor if both
transistor outputs are wired.
NPN output: 1-36 V DC
PNP output: supply voltage
Current output
• Version with only 1 current output (2
wires)
• version with 2 current outputs (3 wires)
4-20 mA, sink ("NPN sink") or source ("PNP source") (depending
on parameter setting)
• max. loop impedance: 1100 W at 36 V DC, 610 W at 24 V DC,
180 W at 14 V DC
• max. loop impedance: 1100 W at 36 V DC, 610 W at 24 V DC,
100 W at 12 V DC
English
Type 8026- 8036- 8076