Burkert Type 8035 - Manual (Page 104)

102
Operatingandfunctions
9.7.30 Clearing the history table of the done dosings
The history menu is cleared upon confirmation of "SAVE YES" when leaving the Parameters menu.
RESEt RESEt N
BACKLit
0......9
→
Choose to clear or not the the history table.
→
Confirm
RESEt Y
HiStORiC
REtURN
Figure 88: Diagram of the "HISTORIC" parameter of the sub-menu "RESET"
→
If you do not want to adjust another parameter, go to the "END" parameter of the Parameters menu and press
ENTER to save the settings or not and go back to the Process level.
9.7.31 setting the brightness of the display and how long it stays
on, or deactivating the backlight
This parameter makes it possible:
• to adjust the brightness of the display and how long the display is backlit after a key press.
• to deactivate the backlight.
BACKLit BKLG= 1
END
→
Set the display brightness, from 1 to 9.
→
Confirm.
BKLG= 9
BKLG OFF
0......9
→
Or, deactivate the backlight.
→
Confirm.
tiME = 30
→
Set the duration the display is backlit after a key press (00 s: the
display is constantly backlit).
→
Confirm.
END
Figure 89: Diagram of the "BACKLIT" parameter of the Parameters menu
→
If you do not want to adjust another parameter, confirm the "END" parameter to save the settings or not and
go back to the Process level.
English
Type 8025 - 8035 BATCH