Fluid Components International CMB - Manual (Page 104)

16. Certificates and approvals
CE marking: The measuring system complies with the legal requirements of the Electromag-
netic Compatibility Directive 89/336/EC and the Explosion Protection Directive
94/9/EC.
The CE mark indicates that the device complies with the aforementioned direc-
tives.
Ex approval:
CT transmitter :
BVS 05 ATEX E 146 X
EEx de [ia] IIC / IIB T6 - T3
EEx d [ia] IIC / IIB T6 - T3
Sensor:
See Section 3.9 Sensor CMB approvals on page 29.
17. Standards and authorizations
17.1 General standards and directives
EN 60529 Ingress protection class (IP code)
EN 61010 Safety requirements for electrical metering, control and laboratory devices
NAMUR guideline NE21, Version 10/02/2004
Explosion Protection Directive 94/9/EEC
OIML R 105 and DIN 19217 (international recommendations for custody transfer operations)
17.2 Electromagnetic compatibility
EMC Directive 89/336/EEC
EN 61000-6-2:1999 (immunity for industrial environments)
EN 61000-6-3:2001 (emissions residential environments)
EN 55011:1998+A1:1999 group 1, class B (emitted interference)
DIN EN 61000-4-2 to DIN EN 61000-4-6
DIN EN 61000-4-8
DIN EN 61000-4-11
DIN EN 61000-4-29
DIN EN 61326
17.3 Ex-Approval transmitter
Explosion Protection Directive 94/9/EEC
EN 50014 General guidelines
EN 50018 Flameproof enclosures “d”
EN 50019 Increased safety “e”
EN 50020 Intrinsic safety “i”
EN 50284 Group II Category 1G
Page 104 of 106
CMB & CT OPERATING MANUAL