Fluid Components International CMB - Manual (Page 48)

12.4.3.2 Input window/modify a value
In the input window, the first line of the LCD always shows the heading, while the second line
shows the current setting.
Example:
Function name
-4,567 Unit
These modifications can only be made in Programming mode (refer to 12.3 Operating modes on page
45), which means that a correct password (see 12.4.3.3 Passwords on page 48) must be entered. To
move the cursor from one decimal place to the next, use the
3or4keys. To increase the value of the
decimal place just under the cursor by “1,” use the 5key, and use 6key to lower the number by 1. To
change the minus and plus sign, place the cursor in front of the first digit. To confirm and apply the
change, press
↵ . To retain the current value, press Esc.
12.4.3.3 Passwords
Programming mode is password protected. The customer password allows all changes to be made that
are permissible for customers. This password can be changed when the device is first put into operation.
Such changes should be kept in a safe place.
The CT customer password in the device when delivered is 0002.
The service password allows for modification of all CT functions. This password is not given to custom-
ers.
For further information on customer passwords, see Section 13.2 PASSWORD functional class on page
55.
Page 48 of 106
CMB & CT OPERATING MANUAL