Fluid Components International CMB - Manual (Page 63)

13.5.1 Mass flow QM unit
Using this function, the operator can define the physical unit for all display functions, limit values and the
upper-range value of mass flow. After choosing the Mass flow QM unit function and pressing
↵, the fol-
lowing selection field will be displayed:
Mass flow QM unit
[kg/h]
According to the description in Section 12.4.3.1 Selection window/make a selection, one of the following
units can be selected:
¾ kg/s, kg/min, kg/h
¾ t/h
¾ g/min
¾ lbs/s, lbs/min, lbs/h
¾ shton/h
¾ lton/h
Press ↵ to confirm and save the selection.
13.5.2 Mass flow QM range
This function allows the operator to set the upper-range value for mass flow. The upper-range value
takes on the unit defined using the Mass flow unit function. The upper-range value will scale the current
and frequency outputs assigned to mass flow. After choosing the Mass flow QM range function and
pressing
↵, the following selection field will be displayed:
QM range=100%
XXXXX.XX kg/h
The current upper-range value for mass flow will be displayed. According to the description in Section
12.4.3.2 Input window/modify a value, the current value can be changed.
CMB & CT OPERATING MANUAL
Part No 06EN003384 rev. 1.6 Page 63 of 106