Fluid Components International CMB - Manual (Page 9)

Introduction
I. Shipping and storage; product inspection
Shipping and storage
The device is to be safeguarded against dampness, dirt, impact and damage.
Product inspection
Upon receipt of the product, check the contents of the box and the product particulars against the infor-
mation on the delivery slip and order form so as to ensure that all ordered components have been sup-
plied. Notify us of any shipping damage immediately upon receipt of the product. Any damage claim re-
ceived at a later time will not be honored.
II. Warranty
Your flowmeter was manufactured in accordance with the highest quality standards and was thoroughly
tested prior to shipment. However, in the event any problem arises with your device, we will be happy to
resolve the problem for you as quickly as possible under the terms of the warranty which can be found in
the terms and conditions of delivery. Your warranty will only be honored if the device was installed and
operated in accordance with the instructions for your device. Any mounting, commissioning and/or main-
tenance work is to be carried out by qualified and authorized technicians only.
III. Application domain the operating manual
The present manual applies to Coriolis mass flowmeters that are operated in conjunction with the CT
transmitter.
IV. Measures to be taken before sending your device to the manufacturer for repair
It is important that you do the following before shipping your flowmeter to Fluid Components Intl for repair:
• Enclose a description of the problem with your device. Describe in as much detail as possible the
application and the physical and chemical properties of the fluid.
• Remove any residues from the device and be sure to clean the seal grooves and recesses thor-
oughly. This is particularly important if the fluid is corrosive, toxic, carcinogenic, radioactive or other-
wise hazardous.
The operator is liable for any substance removal or personal damage costs arising from inadequate
cleaning of a device that is sent for repair.
V. Supplementary operating instructions regarding the HART
® interface
For information regarding operation of the transmitter using the HART
® hand-held terminal, see “Opera-
tion of the CT transmitter using the HART ® hand-held terminal.”
CMB & CT OPERATING MANUAL
Part No 06EN003384 rev. 1.6 Page 9 of 106