INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 11)

11
SOFTWARE INSTALLATION
2.2 Using the admin Utility to locate the camera
If you can’t connect to the camera using the above procedure, you can
use the admin utility software to search for cameras connected to your
local area network.
Insert the included software Cd, and it will automatically begin to install
the admin utility. NOTE: If it doesn’t auto-start, go to Start on your
desktop, then My Computer; double-click on the CD drive where the
software Cd is located, and double-click the “Setup_Admin_3.0.1” icon,
as shown below.
1. When the Welcome to the IPCam Admin Utility Setup Wizard screen
displays, click “Next.”