INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 29)

29
WEB MANAGEMENT INTERFACE
3.5 motion Detection settings
This function is another useful security tool, as it takes a snapshot when
there’s movement in the image area being monitored. With five sub-
sections as shown below, all motion detection-related settings can be
configured on this menu’s screens.
3.5.1 motion Detection
Enable Motion Detection — Select “Enable” to activate the function;
“disable” to deactivate it.
Motion Detection Interval — From the drop-down menu, select the time
interval (in seconds) between two motions. When motion is detected,
the camera won’t detect any motion again during this interval. options
range from “0” (always detect new motion) to “60.”
Recording Time — Select the duration (in seconds) of recorded images.
options are “1,” “2,” “3,” “4” and “5.”
/