INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 23)

23
WEB MANAGEMENT INTERFACE
View Order — Assign this position a number greater than 1 and different
from the other positions. Unless Random order is selected, each tour
will start “visiting” positions in order, from 1 to the highest configured
number and then back to 1.
Remove — Click to delete a selected position from the list.
Save — Click to save the settings.
Close — Click to close the window and discard all changes not saved.
3.4 network settings
With five subsections as shown below, all network-related settings can
be configured on this menu’s screens. NOTE: You need to specify the
TCP/IP parameters here in order to change the IP address, use PPPoe
or dynamic dNS, and activate the UPnP function.
3.4.1 lan
The IP address and port number(s) can be defined on this screen.