INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 6)

6
COMPONENTS & CONNECTIONS
Focus
adjustment
ring
leds
Built-in
microphone
Wireless
antenna
(1 of 2)
1 ComPoNeNTS & CoNNeCTioNS
1.1 front and side
Wireless Antennas —
Connect the camera to
the wireless network.
Focus Adjustment Ring —
For manually setting
the best image quality.
Built-in Microphone —
For two-way audio.
Power led — lights after
the camera completes
the booting process.
Audio led — lights when
Audio is enabled;
flashes if active.
lAN led — lights
when the lAN
port is in use;
flashes during
data transfers.
WlAN led — lights when the wireless lAN
port is in use; flashes during data transfers;
flashes once per second when waiting for
a WPS connection from an access point.
Reset — For reverting to the factory default
settings. Use a straight pin, paper clip or
other pointed object to press and hold this
recessed button in (on the camera base’s
right side, as shown at right) for 5 seconds.
Tripod Ring — For securing the camera to a
tripod or wall/ceiling mount. This twist ring
is on the underside of the camera base.
Reset