INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 44)

44
SURVEILLANCE SOFTWARE
position. NOTE: This function is available only with cameras that
feature it.
Record (7) — Click to begin video recording from a selected camera.
The start date and time of the recording is confirmed in the Message
Display Box; for example, “7/2 11:23:00, Camera 4 Start Manual”
(started manually). Likewise, the message “7/2 11:25:00, Camera 4
Stop Manual” would indicate the recording was manually stopped two
minutes later.
Configure (8) — Click to configure the camera(s) on the network. (See
4.3 Configuration for details.)
Playback (9) — Click to display the Playback screen so you can find the
previously recorded video file you want to view. Two search options
are presented: Time Search presents all video files created within a
specified time period; Motion Search presents all video files created
by the motion detection function within a specified time period. Enter/
select “From” and “To” values in the appropriate fields, then click the
corresponding “Search” button. All found videos corresponding to
those parameters will be displayed as a list in the window at the right.
Highlight the file you want to view and click “Play.”
Snapshot (10) — Click to take a snapshot of a selected camera image.
Snapshots can be saved to a storage folder on your hard drive as
explained in 4.3.2.1 General (Data Directory). Only the available space
on your hard drive limits the number of snapshots that can be taken.
Message Display Box — Displays all system messages; for example,
that a certain camera is disconnected.
Close Window (11) — Click to discontinue Viewer operation.
Minimize Window (12) — Click to minimize the Viewer window.