INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 39)

39
SURVEILLANCE SOFTWARE
SMTP Authentication — Select “enable” if the SMTP server you’re using
requires authentication, then enter the username and password
below; select “Disable” if the server doesn’t require authentication. If
you’re not sure, ask your ISP or network administrator.
Reserved Space — From the drop-down menu, select the amount of
Sd card space that will be reserved and not used.
Apply — Click to put any of the above settings/changes into effect.
Send a test e-mail — Click to send a test e-mail using this configuration.
Copy Mail Config — Click if you’ve activated the Motion detection function
and want to use the same e-mail notification settings here.
3.8.3 file management
This screen lets you manage the files stored on an SD card.
4 SurveillaNCe SofTWare
The camera’s surveillance software (the “Viewer”) provides convenient
functions such as video recording to complement security efforts.
4.1 installing the surveillance software
1. Insert the included software Cd, and it will automatically begin to install
the surveillance software utility. NOTE: If it doesn’t auto-start, go to
Setup_Admin_3.0.1
IPCam Admin Utility Setup