INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 45)

45
SURVEILLANCE SOFTWARE
4.3 Configuration
Before you can effectively use the Viewer program and all its features,
all cameras connected to the network need to be configured. Click the
Configure button on the Viewer control screen to display the “Configure
Cameras”/“General options”
menu, and select “Configure
Cameras.” NOTE: If you’re
prompted by a Windows
security alert asking you if
you want to block the
“IPCamViewer” program,
click “Unblock”; otherwise,
the Viewer program will not
be able to function properly.
4
.3.1 Configure Cameras
Clicking “Configure Cameras” on the popup menu will display the four
submenus and each of their various options, as detailed below.
4.3.1.1 camera