INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 25)

25
WEB MANAGEMENT INTERFACE
Available Networks — This is a list of all wireless access points found
by the camera. Not all access points will be displayed at the same
time, so if the AP you expected to connect to doesn’t appear you may
need to click “Refresh” several times until it does.
• Connect: Select a device you want to connect to.
• SSID: Unless a wireless AP’s SSID is hidden (meaning you’ll need
to identify the device by its MAC address), it’ll display here.
• MAC Address: If there are a lot of wireless access points in proximity
(or if a wireless access point hides its SSID), you can use the MAC
addresses to distinguish them.
• Signal: This indicates the radio signal strength.
• Channel: This is the WAP’s radio channel.
• Encryption: You need to use the same encryption type as the AP