INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 42)

42
SURVEILLANCE SOFTWARE
6. When the Completing the IPCam Surveillance Software Setup Wizard
screen displays, click “Finish” and the Viewer will be activated. If you
prefer to activate it later, de-select “launch IPCam Surveillance
Software” before clicking “Finish.”
4.2 Viewer controls
The Viewer can be activated by clicking its desktop/quick-launch icon or
by selecting “IPCam Surveillance Software” from the Start menu’s
Internet Camera folder. IMPORTANT: The Viewer software will only
work with a monitor resolution setting of 1024 x 768. Be sure this is
your setting before you use the Viewer; otherwise, it won’t start.
Video Display Area — The images from all connected cameras are
displayed in this section.
Language — Make a selection for your operating format.
Display Layout — Click on any one of the eight camera image display
layouts to implement it for the selected camera. (See 4.4 Changing
the Display Layout for details.)
Full Screen (1) — Click to fill the screen with only the image from the