INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 5)

5
SAFETY PRECAUTIONS
fcc caUtion
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
IEEE 802.11b or 802.11g operation of this product in the U.S. is firmware-
limited to channels 1 through 11.
fcc raDiation exPosUre statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm (approximately 8 in.)
between the radiator and your body. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
SafeTy PreCauTioNS
This product has been designed with safety in mind, but as electrical
products can cause fires which may lead to serious damage and injury
if not used properly, observe these precautions:
• Don’t open the camera housing or otherwise expose yourself to
dangerous voltage or other hazards inside.
• Don’t attach/connect accessories that aren’t designed for this device.
• Avoid operating or storing the camera in extreme temperatures (see
Specifications in the user manual).
• Avoid exposing the camera to direct sunlight for a long time.
• Don’t place the camera near heat sources.
• Don’t place the camera near water (e.g., next to a bathtub or sink) or
in an extremely hot or humid environment.
• Don’t place the camera near sources of strong magnetism.
• Don’t place the camera near sources of powerful electromagnetic
radiation, such as radios or TV transmitters.
• Don’t place the camera in locations subject to strong vibration or
shock.