INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 27)

27
WEB MANAGEMENT INTERFACE
Enable DDNS — Select “Enable” to activate the function; “Disable” to
deactivate it.
Provider — dyndns.org is currently the only option available.
Host Name — enter a dynamic dNS hostname.
User Name
— Enter a dynamic DNS username (the same used for the
dyndns.org account).
Password — Enter a dynamic DNS password (the same used for the
dyndns.org account).
Apply — Click to put any of the above settings/changes into effect.
3.4.4 UPnP
When this function is activated, all UPnP-compatible computers/devices
on the same local network will be able to find the camera automatically.
This is useful because you don’t have to remember the IP address of
the camera: Simply go to My Network Places (see below) and it’s there!
Enable UPnP — Select “Enable” to activate the function; “Disable” to
deactivate it.
Apply — Click to put any of the above settings/changes into effect.
When UPnP is activated, a
popup message displays (right).
Click on it to open My Network
Places and you’ll see the
camera.