INTELLINET NETWORK NSC18-WN User Manual - Manual (Page 51)

51
SURVEILLANCE SOFTWARE
Scan Time —
Enter/select an amount of time (in seconds) the Viewer
will display the view from each camera when the Scan funtion is
enabled (see 4.2 Viewer Controls).
Cycle Recording — Select an option for times when the hard disk runs
out of space: “Enable” means recorded video files will be overwritten;
“disable” means they won’t be.
OK — Click to save the current settings.
Cancel — Click to cancel any changes you’ve made before saving.
4.3.2.2 e-mail setting
To receive e-mail notifications of motion detection (as configured on the
4.3.1.4 Motion Record screen and including the image captured by the
camera), set your e-mail parameters on this screen first.