Electro Cam PL-1746 Series - Manual (Page 114)

8-1 Utility & Example Ladder Programs
Electro Cam Corp. has developed the following three types of ladder program for use with the PL-1746 products:
Configuration
These programs provide a way to back up PL-1746 configuration data (all data other than pulse data).
See descriptions below.
Pulses
These programs provide a way to back up PL-1746 pulse data. See descriptions below.
Example
These programs provide examples of ladder programming for modifying PL-1746 configuration and pulse data while in
run mode. These examples can be followed, for example, when making HMIs operate with the PL-1746.
The following chart shows which program sets are used with which PLS models.
Note: A version number, such as 200, may follow the filename and precede the .rss filename extension.
Program Set PLS Models
C01 & C04 Configuration.rss PL-1746-C01-R1
C01 & C04 Pulses.rss PL-1746-C04-R1
C01 & C04 Example.rss
C02 & C03 Configuration.rss PL-1746-C02-R1
C02 & C03 Pulses.rss PL-1746-C03-R1
C02 & C03 Example.rss PL-1746-C02-E1
PL-1746-C03-E1
C02 & C03 -S Configuration.rss PL-1746-C02-R1-S
C02 & C03 -S Pulses.rss
PL-1746-C03-R1-S
C02 & C03 -S Example.rss PL-1746-C02-E1-S
PL-1746-C03-E1-S
Note: To obtain copies of RX-Logix programs, please contact Electro Cam Corp.
by phone (1-800-228-5487) or email ([email protected]).
Overview of Utility & Example Ladder Programs