General Pump LK Repair Manual - Manual (Page 13)

GENERAL PUMP
A member of the Interpump Group
LK SERIES
Advance the big end halves in the direction of the hydraulic part and lock them in place using the special
tool (p/n F27566200) (pos. 1, fig. 38).
Proceed to unscrew the screws of the device (p/n) F2756620) to unlock the connecting rods (pos. 1, fig. 40)
and then take out the connecting rod/piston head assemblies from the rear opening of the casing (pos. 1, fig.
41).
Page 13
Move the crankshaft from the lower part of the casing (pos. 1, fig. 39).