General Pump LK Repair Manual - Manual (Page 15)

GENERAL PUMP
A member of the Interpump Group
LK SERIES
Slip out the pin (pos. 1, fig 44) and take out the connecting rod (pos. 1, fig. 45).
To separate the stem from the piston head, it is necessary to unscrew the hexagonal-head M10 screw using
a no. 17 socket wrench (pos. 1, fig. 46).
Complete the disassembly of the mechanical parts by removing the oil level lights and the eyebolts.
2.1.2 Assembling the Mechanical Parts
Proceed with the assembly, following the reverse of the procedure shown in 2.2.1/ The correct sequence is as
follows:
Attach the two oil level lights and the two oil drain plugs (pos. 1 and 2, fig. 47).
Page 15