Lk series – General Pump LK Repair Manual User Manual
Page 28
Advertising
GENERAL PUMP
A member of the Interpump Group
LK SERIES
Page 28
Insert the O-ring into the rear cover (pos. 1, fig. 91) and affix it to the casing using 10 M8X20 screws
(pos. 1, fig. 92). Tighten the screws with a torque wrench, as shown in section 3 “Screw Tightening Settings”.
Mount the radial seal ring onto the oil seal cover (pos. 1, fig. 93) using a pad (F27910900).
Position the O-ring (pos. 1, fig. 94) on the seat of the oil seat cover.
Advertising