Lk series – General Pump LK Repair Manual User Manual
Page 26
Advertising
GENERAL PUMP
A member of the Interpump Group
LK SERIES
Page 26
Screw in the M16 screw until there is a reduction in the distance X of between 0.7 mm and 0.8 mm (fig. 86).
Insert a shim under the shank of the central connecting rod, to stop the rotation of the crankshaft
(pos. 1, fig. 84).
Measure the distance X indicated in fig. 85 between the conical bushing and the crankshaft bearing.
Advertising