Removing the connector panel and bezel, Removing the connector panel and bezel -18 – ZOLL R Series Monitor Defibrillator Rev J User Manual
Page 84
Advertising
R Series Service Manual
3-18
9650-0903-01 Rev. J
Removing the Connector Panel and Bezel
5. Remove the label covering the connector panel
bezel. It may be necessary to use a new label upon
reassembly.
6. Using a #1 Phillips screwdriver, remove the 9 screws
securing the connector panel bezel.
Note:
During reassembly, torque to 4 in-lbs.
Advertising