Watlow EZ-ZONE ST User Manual
Page 31
Watlow EZ-ZONE
®
ST
•
29
•
Chapter 2 Install and Wire
Data Types Used with CIP
uint
= Unsigned 16 bit integer
int
= Signed 16-bit
dint
= Signed 32-bits, long
real
= Float, IEEE 754 32-bit
string
= ASCII, 8 bits per character
sint
= Signed 8 bits , byte
To learn more about the DeviceNet and EtherNet/IP
protocol point your browser to
http://www.odva.org
.
Profibus DP
To accommodate for Profibus DP addressing the fol-
lowing menus contain a column identified as Profibus
Index. Data types used in conjunction with Profibus
DP can be found in the table below. For more infor-
mation pertaining to the use of this protocol with the
ST control download the RUI/Gateway User Manual
by pointing your browser to:
http://www.watlow.com/literature/pti_search.cfm?dltype=5
Once there move to the bottom of the page and enter
EZ-ZONE into the Keyword field and then click the
search button.
Data Types Used with Profibus DP
Word
= Unsigned 16 bit
INT
= Signed 16-bit Integer
dint
= Signed 32-bit Integer
REAL
= Float, IEEE 754 32-bit
CHAR
= ASCII, 8 bits per character
BYTE
= 8 bits
To learn more about the Profibus DP protocol point
your browser to