Watlow EZ-ZONE ST - Manual (Page 80)

Watlow EZ-ZONE ® ST • 78 • Chapter 7 Features
Lastly, when the configuration is complete click the
"Finish" button at the bottom right of the previous
screen shot. The screen that follows this action can be
seen below.
Although the ST control now contains the configura-
tion (because the previous discussion focused on doing
the configuration on-line) it is suggested that after
the configuration process is completed that the user
save this file on the PC for future use. If for some rea-
son someone inadvertently changed a setting without
understanding the impact it would be easy and per-
haps faster to download a saved configuration back
to the control versus trying to figure out what was
changed.
Of course, there is an option to exit without saving a
copy to the local hard drive.
After selecting Save above click the "Finish" button
once again. The screen below will than appear.
When saving the configuration note the location
where the file will be placed (Saved in) and enter the
file name (File name) as well. The default path for
saved files follows:
\Program Files\Watlow\EZ-ZONE CONFIGURA-
TOR\Saved Configurations
The user can save the file to any folder of choice.