Watlow EZ-ZONE ST - Manual (Page 63)

Watlow EZ-ZONE ® ST • 61 • Chapter 6 Factory Page
Control Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative Ad-
dress
CIP
Class
Instance
Attribute
hex (dec)
Pro DP
Index
Par
ID
RUI/
GTW
Mod-
bus
Data
Type
&
Read/
Write
[LoC;P]
[LoC.P] Security Setting
Profiling Page
Change the security
level of the Profiling
Page.
1 to 3 3 Instance 1
Map 1 Map 2
- - - - 1704
- - - - - - - - 3008 - - - - uint
RWE
[pas;e]
[LoC.P] Security Setting
Password Enable
Turn security fea-
tures on or off.
[`off] Off
[``on] On
Off Instance 1
Map 1 Map 2
- - - - - - - -
- - - - - - - - 3009 - - - - uint
RWE
[rLoC]
[rLoC] Security Setting
Read Lock
Set the read security
clearance level. The
user can access the
selected level and all
lower levels.
If the Set Lockout Se-
curity level is higher
than the Read Lock-
out Security, the Read
Lockout Security
level takes priority.
1 to 5 5 Instance 1
Map 1 Map 2
- - - - 1708
- - - - - - - - 3010 - - - - uint
RWE
[SLoC]
[SLoC] Security Setting
Write Security
Set the write security
clearance level. The
user can access the
selected level and all
lower levels.
If the Set Lockout Se-
curity level is higher
than the Read Lock-
out Security, the Read
Lockout Security
level takes priority.
0 to 5 5 Instance 1
Map 1 Map 2
- - - - 1710
- - - - - - - - 3011 - - - - uint
RWE
[loC;l]
[LoC.L] Security Setting
Locked Access Level
Determines user level
menu visibility when
security is enabled.
See Features section
under Password Se-
curity.
1 to 5 5 Instance 1
Map 1 Map 2
- - - - - - - -
- - - - - - - - 3016 - - - - uint
RWE
[roll]
[roLL] Security Setting
Rolling Password
When power is cycled
a new Public Key will
be displayed.
[`off] Off
[``on] On
Off Instance 1
Map 1 Map 2
- - - - - - - -
- - - - - - - - 3019 - - - - uint
RWE
[pas;u]
[PAS.u] Security Setting
User Password
Used to acquire ac-
cess to menus made
available through the
Locked Access Level
setting.
10 to 999 63 Instance 1
Map 1 Map 2
- - - - - - - -
- - - - - - - - 3017 - - - - uint
RWE
Note:
Some values will be rounded off to fit in the four-character display . Full values can be
read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set