HATZ Diesel 4M42 - Manual (Page 101)

Step Activity
3 Place a suitable tool, such as a screwdriver, behind the emer-
gency start lever (2) and tear the seal wire (3) between the
emergency start lever and the housing screw with a forceful
jerk.
4 Turn the emergency start lever to the start position.
5 Start the engine (see the chapter 7.5 Starting the engine,
page 37).
6 Eliminate the emergency situation within a few seconds.
7 Switch off the engine.
8 Immediately after the emergency operation phase:
▪ Determine the cause of the fault and eliminate it (see the
chapter 9.1 Troubleshooting, page 93).
▪ If necessary, contact your nearest HATZ service station.
2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42 Faults
HATZ Operator's Manual 101