HATZ Diesel 4M42 - Manual (Page 77)

NOTICE
i
▪ The pressure must not exceed 5 bar.
▪ A distance of approx. 150 mm must be maintained between
the filter cartridge and the compressed air gun.
▪ Even minor damage in the areas of the sealing surface, filter
paper or filter cartridge makes it impossible to reuse the fil-
ter cartridge.
Overview
Clean the filter cartridge Check the air filter cartridge
Pos. Designation
1 Sealing surface
Procedure
Step Activity
Dry contamination
1 Blow out the filter cartridge with dry compressed air from the in-
side to the outside until dust no longer emerges.
2 Check the sealing surfaces (1) of the filter cartridge for damage.
3 Check the filter cartridge for cracks in the filter paper and other
damage by holding it against the light at a slant or letting light
from a lamp shine through it.
4 Replace the filter cartridge if necessary (see note).
Moist or oily contamination
1 Renew the filter cartridge.
2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42 Maintenance
HATZ Operator's Manual 77