HATZ Diesel 4M42 - Manual (Page 84)

Overview 2-4L41C and 2-4M41.
Pos. Designation
1 Strap wrench (HATZ order no.: 620 307 01)
Procedure 2-4L41C and 2-4M41
Step Activity
1 On encapsulated engines:
▪ Lift off the capsule hood
(see the chapter 5 Engine design, page 25).
On engines without a capsule:
▪ Remove the side trim panel
(see the chapter 5 Engine design, page 25).
2 Place a suitable container under the filter to collect emerging
fuel.
3 Close the fuel feed line.
4 Slide on the strap wrench (1) and unscrew the fuel filter counter-
clockwise.
5 Dispose of the old filter in accordance with local environmental
regulations.
6 Lightly oil the gasket of the new fuel filter.
7 Mount the fuel filter and tighten it by hand.
8 Open the fuel feed line.
9 To ease the starting procedure, it is recommended that you pre-
pump the fuel using the manual lever at the fuel feed pump until
you hear fuel flow back through the return line into the fuel tank
(see the chapter 7.3.1 Pumping fuel with the manual lever,
page 34).
Maintenance 2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42
84 Operator's Manual HATZ