KANOMAX 6162 Anemomaster - Manual (Page 10)

1. Getting Started 4
1.3 Sheet Key Description
POWER Turn ON/OFF the power.
HOLD Hold the reading and release to hold the reading.
PRINT After holding the display screen, press PRINT key to output the hardcopy of the displayed
screen via external printer.
FAST/SLOW The instrument can be switched into FAST, SLOW1 or SLOW 2.
BATT To display the remaining battery level
This function is available only when batteries are used.
MENU Select each function. There are following functions in this menu.
START/STOP Start/Stop a measurement
△ , ▽ Initial Screen: ▽ key: Press it to display variation graph for air velocity and press it
again to switch the range.
(There are 6 ranges; 50, 25, 10, 5, 2, 1 m/s.)
△ key: Use this key to go back to the original screen.
Menu Screen: Use △, ▽ keys to select the function and item as well as to set numeric
value.
SET Use this key to execute the selected item.
FAST： To display the instantaneous value every 1 sec
SLOW1： To display moving average deviations for 5 seconds
SLOW2： To display moving average deviations for 10 seconds
* This feature cannot be used in the calculation measurement function.
< UTILITY >
1. CALENDAR
2. ANALOG OUTPUT
3. PROGRAM SET
4. RS-232C
< MENU >
1.MONITOR
2.MEASUREMENT
3.DATA OUTPUT
4.MEMORY CLEAR
5.UTILITY
Baud rate (communication speed) setting
To delete memory data
Change to the monitoring screen.
Measurement mode (average, interval, flow rate)
To output memory data (display screen, printer, RS-232C)
Date setting
Measurement mode setting
Analog output range switching