KANOMAX 6162 Anemomaster - Manual (Page 31)

4. How to Redisplay, Print and Delete Stored Data 25
4. How to Redisplay, Print and Delete Stored Data
4.1 How to Redisplay Data
You can re-display the stored calculation result.
However, each memory data cannot be displayed on the
instrument’s display. You need to either output to the printer
or transfer data to the computer via digital output (RS-232C)
Display Key Procedure
MENU (1) Press MENU key.
△ , ▽
SET
(2) Select 3.DATA OUTPUT.
Then press SET key.
△ , ▽
SET
(3) Select 1.DISPLAY.
Then press SET key.
△ , ▽
SET (4) Select the page to be output.
Then press SET key.
[Calculation
Result]
☆ START/STOP or ▽: Page setting screen (a)
☆ MENU: menu display
If data is not stored, “data
not found! MODE PAGE”
will be displayed and go
back to the menu screen.
(a)
< MENU >
1. MONITOR
2. MEASUREMENT
3 . DATA OUTPUT
4. MEMORY CLEAR
5. UTILITY
< DATA OUTPUT >
1 . DISPLAY
2. PRINTER
3. COMPUTER
MEMORY
P: 001
AVERAGE [VT]
08.07.01 10：26
< RESULT >
AVE: 12.5 m/s
MAX: 13.8 m/s
MIN : 11.6 m/s
AVE: 126 ℃
MAX: 129 ℃
MIN : 123 ℃
Measurement
mode
Measurement item
VT: velocity & temp.
Memory page
number
Measurement
data& time
MEMORY
P: 001
AVERAGE [VT]
08.07.01 10：26
<Page Setting Screen>