KANOMAX 6162 Anemomaster - Manual (Page 3)

WARNING
¾ Do not use the instrument in a water vapor atmosphere.
>>> Failure to observe above may cause electrical shock, fire, or damage to
the sensor.
¾ Never touch the sensor.
>>> The sensor is heated during operation.
Touching the heated sensor may cause burns, and may also
damage the sensor itself.
CAUTION
¾ Always unplug the instrument from the electrical outlet when the instrument is
not in use.
>>> Failure to do so may cause electrical shock, fire or circuit damage.
¾ Remove the batteries from the battery compartment when storing the instrument.
¾ DO not leave exhausted batteries in the battery compartment.
>>> Failure to do so may cause battery leakage.
¾ Do not use or leave the instrument in a high
temperature / humidity environment, or in a
dusty environment.
¾ Do not leave the instrument under direct sunlight
for a prolonged period.
>>> The instrument may not function properly out of the
specified operating conditions.
¾ Do not wipe the instrument with a volatile solvent.
>>> The body may deform or deteriorate. Use soft dry cloth to remove stains. If stains
persist, soak the cloth in a neutral detergent and wipe the instrument with the soft
cloth. Never use volatile solvents such as thinner or benzine.
¾ Do not apply strong shock or place / drop anything heavy on
the instrument.
>>> Failure to observe the above may cause damage or
malfunction to the instrument.
¾ Do not touch the sensor when the sensor is charged.
>>> Failure to observe the above may affect the measurement value or cause the circuit
failure.
Prohibition
×
High Temperature
Warning
Handle carefully
Prohibited
Installation
Prohibition
Prohibition