KANOMAX 6162 Anemomaster - Manual (Page 36)

5. Data Output 30
5. Data Output
5.1 Analog Output
Š Output on the measurement screen -------------------------------------- ★ To be output every 0.25 second
★ Output Voltage: DC0 ~ 1V
★ Output Impedance: 47Ω
5.1.1 How to Change Air Velocity Range
Display Key Procedure
MENU (1) Press MENU key.
△ , ▽
SET
(2) Select 5. UTILITY.
Then press SET key.
△ , ▽
SET
(3) Select 2. ANALOG OUTPUT.
Then press SET key.
△ , ▽
SET
(4) Select 1. VELOCITY.
Then press SET key.
Output Range
Air Velocity Air Temp.
0 ~ 5 m/s 0 ~ 50 °C
0 ~ 25 m/s 0 ~ 100 °C
0 ~ 50 m/s 0 ~ 200 °C
0 ~ 500 °C
Initial Screen: Except when the screen is on hold
Measurement Mode: Except when the calculation result
is displayed or the instrument is
waiting for the next sampling
Analog Output Terminal
V: Air Velocity
T: Air Temperature
(a)
< MENU >
1.MONITOR
2.MEASUREMENT
3.DATA OUTPUT
4.MEMORY CLEAR
5 .UTILITY
< UTILITY >
1.CALENDAR
2 .ANALOG OUTPUT
3.PROGRAM SET
4.RS-232C
< ANALOG OUTPUT >
1 . VELOCITY
2. TEMPERATURE