KANOMAX 6162 Anemomaster - Manual (Page 13)

1. Getting Started 7
1.5.4 Display Screen – Monitor Screen
When the display does not change to the monitoring screen
Symptom Solution
PROBE display remains. Probe is not connected.
Ö Turn the power OFF. Then after connecting the
probe, turn the power ON again.
The responsiveness of
reading is bad.
Isn’t SLOW1 or SLOW2 (displaying moving
average deviations) displayed on the upper right
corner of the screen?
Ö Press FAST/SLOW key to switch to FAST.
Date and time are not
displayed.
Calculation program is set.
Ö Press MENU key to select 1.MONITOR.
08.07.15 FAST
10:26:40
12.8 m/s
27.5 ℃
Power ON
This will be displayed for 2 sec.
Date ····· Year. Month. Date
Time(24-hour display) ····· Hour:Min:Sec
Š
Start measuring when this
screen is displayed.
When probe is not connected ) P6
Use FAST/SLOW key ) P9
* 3 options: FAST、SLOW、SLOW2
FAST: instantaneous value every second
SLOW1: moving average deviations for 5 seconds.
SLOW2: moving average deviations for 10 seconds.
* To change the date and time ) P12
Simultaneous display
Air velocity
Air temp.
08.07.15 FAST
10:26:40
PROBE
40-0001
VER. 1.0
KANOMAX
ANEMOMASTER
< AVE > ready
T: 00/10 M:015
N: 000/010 P:007
12.8 m/s
27.5 ℃
08.07.15
10:26:40
PROBE
40-0001
08.07.15 SLOW1
10:26:40
12.8 m/s
27.5 ℃