KANOMAX 6162 Anemomaster - Manual (Page 2)

Important Safety Information
Types and definitions of warnings signs used in this operation manual are described as below.
[Classifications]
WARNING: To Prevent Serious Injury or Death
Indicates a potentially hazardous situation which, if not avoided, may result in serious
injury or death.
CAUTION:
To Prevent Damage to the Product
Indicates a potentially hazardous situation which, if not avoided, may result in damage
to the product that may void the product warranty.
[Description of Symbols]
U indicates the condition (including danger) that requires caution. The subject of each caution is
illustrated inside the triangle (e.g., the symbol shown on the left is high temperature caution).
indicates prohibition. Do not take the prohibited action shown inside or near this symbol
(e.g., the symbol on the left prohibits disassembly).
z indicates a mandatory action. A specific action is given near the symbol.
WARNING
¾ Never bring the probe close to a flammable
gas atmosphere.
>>> The heated sensor may cause fire or explosion.
¾ Never disassemble, modify or repair the product.
>>> Failure to observe the above may cause short circuit and/or other failure that will affect
the performance.
¾ Carefully follow the instructions provided in this Manual.
>>>> Failure to observe the instructions may lead to electrical shock, fire or damage to the
instrument.
¾ If abnormal noise, smell or smoke is observed, or if liquid has entered the
instrument, turn off the instrument immediately, and remove the batteries or pull
out the plug.
>>> There is a possibility of malfunction, electric shock, and fire.
Please contact your local distributor or our service center for repair.
Do not use near
flammable gas.
Do not modify /
disassemble.
Handle properly