KANOMAX 6162 Anemomaster - Manual (Page 37)

5. Data Output 31
△ , ▽
SET
(5)
(a) The range highlighted is the current set range.
If there is no change to be made, press SET key.
The screen will go back to the ANALOG OUTPUT screen (a).
(b) To change the range, select the range and press SET key.
(6) The selected range will be highlighted, and the screen will
automatically go back to the ANALOG OUTPUT screen (a).
MENU (7) Press MENU key to go back to the menu screen.
* Analog voltage is output ony when the display screen indicates a
measurement is being performed.
To change the air temperature’s
output, perform the same
procedure.
(a)
< RANGE >
1. 0 5 m/s
2 . 0 25 m/s
3. 0 50 m/s
< MENU >
1 .MONITOR
2.MEASUREMENT
3.DATA OUTPUT
4.MEMORY CLEAR
5.UTILITY
< ANALOG OUTPUT >
1 . VELOCITY
2. TEMPERATURE
< RANGE >
1 . 0 5 m/s
2. 0 25 m/s
3. 0 50 m/s
< RANGE >
1. 0 5 m/s
2 . 0 25 m/s
3. 0 50 m/s
Range Conversion Equation
0~ 5 m/s U = 0.005 × V
0~25 m/s U = 0.025 × V
Air
Velocity
0~50 m/s U = 0.05 × V
0~50 °C T = 0.05 × V
0~100 °C
0~200 °C T = 0.1 × V
T = 0.2 × V Air
Temp.
0~500 °C T = 0.05 × V
Velocity
Temp. 0
0 2.5
50.0
5.0 m/s
100°C
0.5
1.0
Out
p
ut
(V
)
<Example>
[Symbols]
U: Air Velocity (m/s)
T: Air Temp (°C)
V: Output Voltage (mV)
< Output Voltage Conversion>