Configuration 36, Out.5, Out.6 – West Control Solutions KS 92-1 Programmer manual User Manual
Page 36: Logi, Configuration level
Configuration level
Configuration parameters
36
KS 90-1
p / KS 92-1
p
Name
Value range Description
Default
FAi.1
FAi.2
FAi.3
INP1/2/3 error (only visible when O.TYP=0)
0
0
not active
1
active
Prg.1
Prg.2
Prg.3
Prg.4
Programmer Control track 1/2/3/4
0
0
not active
1
active
CAll
Operator call
0
0
not active
1
active
Out.0
-1999...9999
Scaling of the analog output for 0% (0/4mA or 0/2V, only visible
when O.TYP=1..5)
0
Out.1
-1999...9999
Scaling of the analog output for 100% (20mA or 10V, only visible
when O.TYP=1..5)
100
O.Src
Signal source of the analog output OUT3 (only visible when
O.TYP=1..5)
1
0
not used
1
controller output y1 (continuous)
2
controller output y2 (continuous)
3
process value
4
effective set-point Weff
5
control deviation xw (process value - set-point)
6
measured value position feedback Yp
7
measured value INP1
8
measured value INP2
9
measured value INP3
fOut
Forcing OUT3 (only visible with BlueControl!)
0
0
No forcing
1
Forcing via serial interface
q
Out.5
/
Out.6
Configuration parameters as Out.1 except for: Default
Y.1 = 0 Y.2 = 0
g
Method of operation and usage of output
Out.1 to Out.6:
Is more than one signal chosen active as source, those signals are OR-linked.
q
LOGI
Name
Value range Description
Default
L_r
Local / Remote switching (Remote: adjusting of all values by
front keys is blocked)
0
0
no function (switch-over via interface is possible)
1
always active
2
DI1 switches
3
DI2 switches (basic instrument or OPTION)
4
DI3 switches (only visible with OPTION)
5
è - key switches