West Control Solutions CI 45 - Manual (Page 14)

. 5 Operation
5.1 Front view
1 Line 1: process value display
2 Line 2: display of unit / extended operating level / error list /
Conf and PArA level values
3 Tare / sample & hold activated
4 Error list (2 x ô ), e.g.
· Fbf. x
sensor fault INP. X
· sht. x
short circuit INP. X
· Pol. x
wrong polarity INP. X
· Lim. x
limit value alarm
· ...
5 Increment key / slave pointer, maximum value
6 Enter key to select extended operating level or error list
7 LED indication of instrument status
· green: OK
· green blinking: no data exchange with bus coupler
(only on instruments with optional
system interface)
· red:
limit value I triggered
· red blinking: instrument fault
8 Display elements, active as bars
9 Status of switching output OUT1 / INP1 active
0 Status of switching output OUT2 / INP2 active
! Decrement key / slave pointer, minimum value
§ PC connection for the BlueControl
Ò
engineering tool
g
The measurement value is displayed in LCD line 1. In the second line, the selected unit is displayed as
standard. When changing over to the parameter setting, configuration or calibration level and at the
extended operating level, the parameter name and value are displayed alternately.
+
§ : To facilitate withdrawal of the PC connector from the instrument, please, press the cable left.
Operation
14 Front view UNIFLEX CI 45