West Control Solutions CI 45 - Manual (Page 5)

. 1 General
Thank you very much for buying a Universal Transmitter UNIFLEX CI 45.
UNIFLEX CI 45 transmitters are suitable for precise, cost-efficient signal detection and processing. Every CI 45 is
equipped with at least one universal input, one universal output and a relay. Optionally, the transmitter can be fitted
with an additional relay.
Galvanic isolation is provided between inputs and outputs as well as from the supply voltage and the communication
interfaces.
Applications
CI 45 is used for measurement, scaling and separation of electrical signals, e.g. for
w
Heat treatment plants
w
Drying equipment
w
Furnace builders
w
Metallurgy
w
Kilns
w
General machine building
w
Research and development
w
Energy measurement
w
Signal conversion
...
At-a-glance survey of advantages
Compact construction, only 22,5 mm wide
Clips onto top-hat DIN rail
Plug-in screw terminals or spring clamp connectors
Dual-line LC display with additional display elements
Process values always in view
Convenient 3-key operation
Direct communication between rail-mounted transmitters
Universal input with high signal resolution (>15 bits) reduces stock keeping
Universal output with high resolution (14 bits) as combined current / voltage output
Quick response, only 100 ms cycle time, i.e. also suitable for fast signals
One or two relay outputs
Customer-specific linearization
Measurement value correction (offset or 2-point)
Min/max indicator ('slave pointer')
Logical linking of digital outputs, e.g. for common alarms
Preset of output value
* This documentation includes already several options which will be available only with
operating version 2 instruments.
Further documentation for universal transmitter CI 45:
– Data sheet CI 45 9498 737 48313
– Operating note CI 45 9499 040 71441
– Interface description 9499 040 72011
- preliminary - General
UNIFLEX CI 45 5