West Control Solutions CI 45 - Manual (Page 28)

6.11 Tare function (optional)
Switching on the tare function sets the instantaneous input value to zero and measurement is continued with this
offset. By switching off the tare function, the actual measurement value is displayed again .
Measurement value
Effective value
The tare function is enabled during configuration ( Func r Fnc.3 = 1).
Dependent on configuration, the tare function can be activated by digital input di1 or interface ( LOGI r
tArA).
An active tare function is displayed as an active bar for display element ‘F’ .
6.12 Sample&hold amplifier (optional)
With the sample & hold function activated, the measured value is held on the display. After de-activating the s ample &
hold function, the actual measurement value is displayed again.
Measurement value
Effective value
The sample&hold amplifier function can be activated during configuration ( Func r Fnc.3 = 2).
Dependent on configuration, the sample&hold function can be made effective via digital input di1 or via the interface
(
LOGI r HOLd).
An active sample&hold amplifier function is displayed as an active bar for display element ‘F’ .
Functions - preliminary -
28 Tare function (optional) UNIFLEX CI 45
t
1 2 F E
450.3
ыC
дььь
1 2 F E
617.2
ыC
дььь
1 2 F E
75.9
ыC
дьдь
t
1 2 F E
450.3
ыC
дььь
1 2 F E
450.3
ыC
дььь
1 2 F E
450.3
ыC
дььь
1 2 F E
450.3
ыC
дьдь
1 2 F E
450.3
ыC
дьдь