HP LaserJet Enterprise M4555 MFP series - Manual (Page 213)

NOTE: If the Fax Setup menu settings does not appear in the menu listing, LAN or internet fax might
be enabled. When LAN or internet fax is enabled, the analog fax accessory is disabled and the fax
menu does not display. Only one fax feature, either LAN fax, analog fax or internet fax, can be
enabled at a time. The fax icon displays for either fax feature. If you wish to use analog fax when LAN
fax is enabled, use the HP MFP Digital Sending Software Configuration Utility or the product embedded
Web server to disable LAN fax.
Set or verify the date and time
The date and time setting for the fax accessory is the same value as the product date and time setting.
This information can be entered using the Fax Setup Wizard, or by following these steps:
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
● General Settings
● Date/Time Settings
● Date/Time
3. Touch the correct Time Zone setting for your locale.
4. Touch the Month drop down menu and select a month.
5. Touch the boxes next to the Date drop down menu to enter the day and year from the keypad.
6. Touch the boxes below the Time heading to enter the hour and minutes from the keypad and then
touch the AM or PM button.
7. Touch the Adjust for Daylight Savings feature, if necessary.
8. Touch the Save button to save the settings.
Set or verify the date/time format
The date and time format setting for the fax accessory is in the same format as the product date and
time setting. This information can be entered using the Fax Setup Wizard, or by following these steps:
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
● General Settings
● Date/Time Settings
● Date/Time Format
3. Touch a Date Format option.
4. Touch a Time Format option.
5. Touch the Save button to save the settings.
ENWW Set up fax 193