Clean the product – HP LaserJet Enterprise M4555 MFP series User Manual
Page 282
5.
Insert and tighten the retaining screws that came with the print server card.
6.
Reconnect the power cable and remaining interface cables, and turn the product on.
7.
Print a configuration page. An HP Jetdirect configuration page that contains network configuration
and status information should also print.
If it does not print, turn the product off, and then uninstall and reinstall the print server card to
ensure that it is completely seated in the slot.
8.
Perform one of these steps:
●
Choose the correct port. See the computer or operating system documentation for
instructions.
●
Reinstall the software, choosing the network installation this time.
Clean the product
To clean the product exterior, use a soft, water-moistened cloth.
262
Chapter 12 Manage and maintain
ENWW