HP LaserJet Enterprise M4555 MFP series - Manual (Page 81)

5. To configure the product software to recognize the installed accessories, complete these steps:
Mac OS X 10.5 and 10.6 1. From the Apple menu , click the System Preferences menu and then
click the Print & Fax icon.
2. Select the product in the left side of the window.
3. Click the Options & Supplies button.
4. Click the Driver tab.
5. Configure the installed options.
NOTE: For Mac OS X 10.5 and 10.6, the installation procedure should
automatically configure the installed options.
6. Print a page from any program to make sure that the software is correctly installed.
NOTE: If the installation failed, reinstall the software.
Install software for Mac computers on a wired network
Configure the IP address
1. Make sure the product is turned on and that the Ready message appears on the control-panel
display.
2. Connect the network cable to the product and to the network.
3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
4. At the product control panel, touch the Network Address button to identify the product IP address
or host name.
ENWW Software for Mac 61