HP LaserJet Enterprise M4555 MFP series - Manual (Page 96)

Table 5-1 Supported network protocols (continued)
Network type Supported protocols
TCP/IP IPv6 networks only ● Dynamic Host Configuration Protocol (DHCP) v6
● Multicast Listener Discovery Protocol (MLD) v1
● Internet Control Message Protocol (ICMP) v6
Other supported network protocols ● Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX)
● AppleTalk
● NetWare Directory Services (NDS)
● Bindery
● Novell Distributed Print Services (NDPS)
● iPrint
Table 5-2 Advanced Security features for network management
Service name Description
IPsec/Firewall Provides network-layer security on IPv4 and IPv6 networks. A firewall provides
simple control of IP traffic. IPsec provides additional protection through
authentication and encryption protocols.
Kerberos Allows you to exchange private information across an open network by assigning a
unique key, called a ticket, to each user who logs on to the network. The ticket is
then embedded in messages to identify the sender.
SNMP v3 Employs a user-based security model for SNMP v3, which provides user
authentication and data privacy through encryption.
SSL/TLS Allows you to transmit private documents via the Internet and guarantee privacy
and data integrity between the client and server applications.
IPsec batch configuration Provides network-layer security through the simple control of IP traffic to and from
the product. This protocol provides the benefits of encryption and authentication
and allows for multiple configurations.
Install the product on a wired network
Configure the IP address
1. Make sure the product is turned on and that the Ready message appears on the control-panel
display.
76 Chapter 5 Connect the product ENWW