Network settings menu – HP LaserJet Enterprise M4555 MFP series User Manual
Page 59
Table 2-12
Stapler/Stacker Settings
menu (continued)
First level
Values
Stapling
None
Top left or right
Top left
Top right
Staples Very Low
Continue
Stop
Network Settings menu
To display: At the product control panel, select the
Administration
menu, and then select the
Network
Settings
menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-13
Network Settings
menu
First level
Values
I/O Timeout
Range: 5 – 300 sec
Default = 15
Embedded Jetdirect Menu
EIO <X> Jetdirect Menu
See the table that follows for details. These menus have the same
structure. If an additional HP Jetdirect network card is installed in the
EIO slot, then both menus are available.
Table 2-14
Embedded Jetdirect Menu
/
EIO <X> Jetdirect Menu
First level
Second level
Third level
Fourth level
Values
Information
Print Sec Page
Yes
No
*
TCP/IP
Enable
On
*
Off
Host Name
IPV4 Settings
Config Method
Bootp
DHCP
*
Auto IP
Manual
ENWW
Administration menu
39