HP LaserJet Enterprise M4555 MFP series - Manual (Page 235)

3. Touch one of the following notification settings:
● Do not notify (default)
● Notify when job completes
● Notify only if job fails
4. Touch the Print option to receive a printed notification, or touch the E-mail option to receive an e-
mail notification.
5. If you selected the Print option, touch the Save button to complete the notification setup.
-or-
If you selected the E-mail option, use the keyboard to type an e-mail address. Then touch the Save
button to complete the notification setup.
6. Touch the Include Thumbnail check box to include a thumbnail image with notifications.
Stamp received faxes (incoming faxes)
The stamp received faxes setting enables or disables stamping incoming faxes. The stamp prints the
date, time, phone number, and page number on each incoming page.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
● Fax Settings
● Fax Receive Settings
● Default Job Options
● Stamp Received Faxes
3. Touch the Disabled option (default) to disable the stamp, or touch the Enabled option to enable the
stamp.
4. Touch the Save button.
Set fit-to-page
When selecting a page size to print a fax, the product determines the closest page size that matches
the intended size from sizes available in the product. If the fit-to-page setting is enabled and the
received image is larger than that page size, the product attempts to scale the image to fit the page. If
this setting is disabled, an incoming image larger than the page splits across pages.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
● Fax Settings
● Fax Receive Settings
ENWW Set fax settings 215