HP LaserJet Enterprise M4555 MFP series - Manual (Page 97)

2. Connect the network cable to the product and to the network.
3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
4. At the product control panel, touch the Network Address button to identify the product IP address
or host name.
If the Network Address button is not visible, you can find the IP address or host name by printing a
configuration page.
a. At the product control panel, scroll to and touch the Administration button.
b. Open the following menus:
● Reports
● Configuration/Status Pages
● Configuration Page
c. Touch the View button to view the information on the control panel, or touch the Print button
to print the pages.
d. Find the IP address on the Jetdirect page.
5. IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually configure
the IP address. Otherwise, the network configuration was successful.
ENWW Connect to a network 77