HP StorageWorks XP Remote Web Console Software - Manual (Page 108)

list, and click Delete. To cancel all operations, select all the operations in the preview list,
right-click, and click the Delete command, or click Cancel.
9. To start the operation(s), click Apply. The changes that you set are reflected in the upper list
on the window. The preview list is cleared. If one or more operation(s) did not start normally,
the preview list displays only the operation(s) that did not start normally. An error code is
displayed on the Error Code column in the preview list. To display the error message, right-click
the preview list and click Error Detail command. If some errors occur simultaneously, the error
messages are displayed at the same time. Click Apply again.
RCU Path Parameters
For Fibre Channel interface, two types of PCB mode settings are provided: Standard and High.
Therefore, when you configure paths among the initiator ports, target ports, and RCU target ports,
study the port modes and specify the correct mode for each port. For details on the relationship
between ports and PCB modes and instructions for setting the PCB mode, see the HP StorageWorks
XP24000/XP20000 LUN Manager User's Guide.
“Add RCU Operation” (page 109) shows a
sample TrueCopy for Mainframe Fibre Channel interface configuration with connections going
through switches and the TrueCopy for Mainframe Add RCU window used to define this
configuration.
108 Performing TrueCopy for Mainframe Configuration Operations